Preparation of gyroscope

Key words:

Products News Download

Gyroscope Dedicated Testing System


This device is used for de-gassing, inflating, and leak testing of gyroscopes. It is widely used in military and civilian fields such as aviation, aerospace, and shipping. The system has explosion-proof safety measures; it employs an oil filtration device. It also has environmental protection measures, with a gas outlet equipped with a toxic gas filter.

Gyroscope vacuum helium welding equipment


It is possible to achieve vacuum pumping, vacuum filling, and automatic welding processes in a vacuum state for inertial navigation devices. Customized specialized processes are developed for different interfaces and materials, with a post-welding leak rate better than 5×10-10 Pam3/s.

Gyro Vacuum Mixing Table


1. The ultimate vacuum degree of the vacuum system: 5×10^-8 Pa (at least 4 sampling gas bottles). 2. The leakage rate of the vacuum system: 5×10^-10 Pa.m³/S, with Party B providing a helium mass spectrometer for detection. 3. The vacuum system is required to be completely oil-free, and after reaching the ultimate vacuum, the quadrupole mass spectrometer scan should show no mass peaks greater than 44.

Gyroscope Oil Drip Table


This set of equipment has functions such as vacuuming in the vacuum chamber, heating the oil cup, separately evacuating the oil cup, heating the workpiece, and filling the workpiece with oil, allowing for precise control of the oil filling amount in gyroscopes. It can be used for devices that require filling with high-purity oil, such as gyroscopes, precision instruments, precision sensors, and transmitters.