Product classification
Liquid nitrogen cooling ring mold equipment
The temperature protection system of the liquid nitrogen cooling ring mold equipment mainly consists of a liquid nitrogen system, a heat sink, and a heating cage. It uses liquid nitrogen as a refrigerant to cool the heat sink inside the vacuum chamber, bringing its temperature down to around 100K. By adjusting the output power of the heating cage's heating power supply, the temperature range of the vacuum chamber can be achieved from -180°C to +180°C. This cooling method is suitable for medium and large ring mold equipment that requires a wide temperature range and has a high usage frequency.
Classification:
Key words:
Product Details
Device Features
The liquid nitrogen cooling ring mold equipment temperature assurance system mainly consists of a liquid nitrogen system, heat sink, and heating cage. It uses liquid nitrogen as a refrigerant to cool the heat sink inside the vacuum chamber, achieving a temperature of around 100K. By adjusting the output power of the heating source in the heating cage, the temperature range of the vacuum chamber can be obtained from -180℃ to +180℃. This cooling method is suitable for medium and large ring mold equipment that requires a wide temperature range and has a high usage frequency.
The liquid nitrogen cooling ring mold equipment developed by our unit features a short time to achieve the specified vacuum level, high ultimate vacuum level, cleanliness and pollution-free, high safety and reliability, and simple and convenient operation. Depending on the complexity of the liquid nitrogen system and customer usage characteristics, it can be developed into an open boiling liquid nitrogen cooling system and a pressurized throttling liquid nitrogen cooling system. Such equipment can be used for system-level and component-level acceptance and identification tests of various spacecraft.
Applicability
1. Temperature range: -180℃ to +180℃;
2. Mainly suitable for KM2 level and above ring mold equipment;
3. For lower usage frequency, it is recommended to use an open boiling liquid nitrogen system, which has a relatively low development cost;
4. For higher usage frequency, it is recommended to use a pressurized throttling liquid nitrogen system, which has a relatively low operating cost;
5. The ultimate vacuum level at room temperature under no load can reach 10-6Pa.
Next Page
online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.(There is a discount for retaining funds today)